personalized gifts for dad Garden Frock decorative pillow shams

 personalized gifts for dad     |      2020-03-27 08:36

This easygoing double gauze garden frock will protect your clothes from soil and debris while you harvest the fruits of your labor in the garden. With its slightly Zakka side, the apron will fit women of all sizes with some modifications during construction.

For this project I chose double gauze for its double-sided cool but cotton twill would work all the same and create a sturdier apron.?Regardless of the type of fabric you choose, make sure the width is over 50 inches wide.

couch cushion covers diy

Note: ALL SEAM ALLOWANCES ARE 1/2” UNLESS OTHERWISE NOTED.

Fold the 7.5″ by 21″ rectangle in half lengthwise right sides together and pin. Sew along the long side, turn the rectangle right side out and press. Topstitch you seams ?″ from the edges. Topstitching makes your straps sturdier. Repeat for the other strap.

Find the middle of your body piece on the 50″ side and mark it with a pin. You are going to pin the straps as shown 4″ on each side of the pin. Baste in place ?″ from the edge. Note that the fabric side with squares is the “wrong side” for this project.

Place the facing “wrong” sides together (for a contrasting facing in the front) along the 50” side of the body piece and pin well. Sew the top seam with a ?″ seam allowance with the straps sandwiched between the two layers.

Note: It is useful to engage the upper feed dog and fit your machine with a BERNINA Zipper foot # 4D foot if you are sewing on a 7 Series machine. This will prevent the layers from stretching as you sew.??Flip the facing up and over and presspersonalized gifts for dad, topstitch the new seam making sure to keep the straps out of the way with a ?″ seam allowance.

Turn under ?″ of the raw edge of the facing, pin and press.

Sew the sew along the edge of the foot (the BERNINA Zipper foot # 4D is wonderful to prevent stretching) and again along the very outside edge of the seam,? use an edge-stitch foot for that step such as number BERNINA Edgestitch foot #10 or 10D.

For this step I will let you decide how long and large you want your pocket to be and if you want it to have several compartments. It really depends on the use for the apron. If you want to be able to fill it with cherry tomatoes and basil you can use a nice wide pocket, but if you want to cook wearing the apron you won’t need one at all. I pieced my pocket to showcase the selvages and the two sided nature of the gauze.

For any pocket you decide to make I recommend pinning the apron straps in a crisscrossed fashion to the back close to the sides and deciding where you want your pocket to sit on your body. Once you have a rough idea of the placement make sure it is centered.

Finish the top and bottom by turning the fabric over ?″ twice and topstitching.? (I omitted this step as I am using the raw edges as a design element).

Turn the side over ?″ and pin. ?sew along the edge of the foot and again along the fold this time with an edgestitch foot. You can divide your pocket in two parts by sewing a perpendicular line to the bottom hem anywhere on the pocket.

You can make the apron more feminine by adding a front tuck. First find the middle of the apron and mark with a pin, fold about 1.5 to 2″ of fabric toward the pin, meeting at the center, pin well. Sew along the previous seam line at the top, making sure to come back and forth a few times on the meeting section.

Pinning the? apron on again, decide the final length. I factored plenty of extra length in the pattern pieces that you can have a long apron if you wish. Fold up what is need and press, fold the raw edge under by ?″ and press. Pin and sew along the edge of the foot and then again along the fold with an edgestitch foot.

You can hem the apron sides by turning under ?″ twice, pinning and sewing with the outside edge along the side of the foot.

To attach the straps to the apron you will need to pin them first in the criss-cross fashion shown on picture. You can pin them to the outside or the inside it does not matter. You want to get a feel for the ideal length of the straps. They should be fairly short so that the front of the apron does not gape and get in your way.

The straps are pinned to the inside of the apron in the manner shown on picture.

Sew ?” from the raw edge and flip up. Sew again ?″ from the strap fold as shown on picture.

Make sure to keep the strap out of the way when you sew.

Your apron is almost done, you can try it on and decide if you would like a button to hold it closed in the back. With the help of a friend use a pin or a safety pin to mark where the button should be and where the matching button hole should be. I recommend a vertical button hole. I also recommend using a small piece of cut away stabilizer beneath your work. Sew a button hole with your favorite method to the outside of the overlap, sew a button to the inside of the overlap.

I never thought in million years having a very tiny crochet hook would prove to be an essential tool to my quilting. ?I don’t need it too often, thank goodness, but when those rare moments occur the?Soft Touch Thread pick is a tool that I cannot imagine doing without.

Catalog shoots are fun, but they are even more fun when you get to shoot in fantastic spaces inhabited by fantastic people.

THREAD, DON’T DREAD